Garage doors don’t always function properly. That can become very frustrating — especially if you need to use your garage. Before you contact a garage door professional, you can try these easy steps to fix the problem. Following these steps, you might fix the problem without paying for repairs. With that said, here is some guidance to help you troubleshoot your garage doors.
Check If There Is Power
If your garage door won’t open or close, check whether it has power. At times, your house might black out. If other electrical devices don’t work, you will probably have to wait until the power returns. You can open and close your garage door by hand using the manual release handle when there’s no power. The manual release is a red cord, most commonly hanging from the garage door opener. You can pull it to disconnect the door from the opener so you can move it by hand.
Test the Remote Control
Check the remote to see if it only works when the remote is a certain distance away. You could try moving closer to the door and pressing that button again. If the remote isn’t working, you might have to reprogram the remote. Refer to the manual for your garage door opener for instructions on resetting the remote.
Check the Garage Door Tracks
Garage doors roll open and closed on metal tracks. If you notice dirt or debris, wipe the tracks with a cloth or brush. The door may be unable to open or close properly if the tracks are bent or broken. If this sounds like a situation you find yourself in, you might need professional garage door service to repair the tracks. Do not attempt to bend the tracks yourself, as that can create further damage.
Look at the Garage Door Springs
These springs are under considerable tension, and the door may not function properly if one snaps. If your garage door doesn’t open, inspect the springs above the door. If you see a broken spring, you need to call a professional, and you should not attempt to fix it yourself. Springs serve as a potent energy source, and this energy release causes them to snap when under tension. Contact a professional garage door expert to replace them safely.
Check the Safety Sensors
Modern garage doors are equipped with safety sensors at the bottom. If the sensors are not blocked, adjustment is needed. So, twist the sensors gently until they are poised in front of each other. Typically, there is a small light on each sensor. A blinking light indicates a misalignment of sensors. Tweak them until the light is solid. Then, attempt to close the garage door again.
Lubricate moving parts
Garage doors have plenty of moving parts — rollers, hinges, tracks. If dried, these parts can cause the door to jerk or squeal. Solution: Apply a unique garage door lubricant to all moving parts. Use a garage door-compatible spray or liquid lubricant. Avoid thick grease, though, as this could attract dirt and exacerbate the issue. The lubrication will keep those moving parts creeping. It should be done at least twice yearly to keep your garage door in good shape.
Seek a Professional If the Issue Persists
If your garage doors still do not work after trying all these steps, then it is best to call a professional. Garage door professionals have the tools and experience to address the issues safely and quickly. If you reside in Burlington, professionals like Garage Doors in Burlington help with repairs and upkeep.
Conclusion
Routine maintenance of your garage doors can prevent roadblocks down the line. These troubleshooting steps can help you maintain your garage doors. Do not hesitate to consult a professional for help if you feel overwhelmed.
